Robotic Welding Cell demonstrates a flexible manufacturing cell meaning it has an inventory of its own, material handling system, variety of parts with dynamic-order.This welding cell can be a part of production line and act as standalone system.Use of single or multiple robots may involve use of a PLC also.This cell uses a saftey PLC.This cell has all these features and the basis of selection can be done in a way that the cell will be programmed, utilization of peripheral devices (proximity sensors, pneumatic cylinders), safety devices and Automatic Identification & Data Capturing (AIDC) devices like RFID, vision camera etc.
The cell has following level of flexibility but the decision can be made on the basis of the flexibility required as per the following parameters:

1. Variety of parts for simultaneous production
2. Change of schedule
3. Ready for new part

Workstations and layout design :

Workstations in the cell are as per the following given applications and subject to following parameters : 

1. Load/Unload stations for the cell: It is the area where the raw materials are incepted in/out of the cell.

2. Inventory storage area: An inventory storage where the storage of the raw material is kept.

3. Inspection area: An area where the material post operations are inspected for quality. This is kept as a separate unit away from the cell but it can be an integral part of the cell itself.

4. Operations area: An area where the operations like welding is performed. In the cell , this area is more of a workspace since two robots are responsible for performing welding on the material. And it can be anywhere in the robot's workspace. 

5. Layout design: It is an integral part before identifying the robots and environment preparation and also plays a key role in safety of the cell.

CAD Design & Simulation:
The 3D visualization and detailing of the cell is done using a designing software. The robotic path simulation software asists in defining the best possible, collision free environment that is going to be the basis of the layout design and all other hardware that are going to be installed in the cell. Apart from designing & fabrication of the cell it helps in performing the robot simulations to generate offline program, collision free environment (this is how the level of flexibility achieved) for robots at operating stage and generating Augmented Reality applications.